Light Storm 1/2w
The Strongest Storm, the Highest CRI
The color rendering index (CRI) is a quantitative measure of the ability of a light source to reproduce the colors of various objects faithfully in comparison with an ideal or natural light source. The stunning breakthrough of Light Storm 1/2w with CRI 98 can completely with perfectcolor of sunlight and ensure that its light is natural and lifelike.
The Light Storm LS 1/2w is made of 264 SMD lamp beads that have been designed and manufactured carefully to have over 95 CRI value. Its delicate design and elaborate production make a robust but exquisite housing that can fulfill low forward heat of the fixture. LS 1/2w offers dual power solutions: You can use a V-Mount or Anton Bauer battery for on-location shooting, and an attached adapter is for indoor shooting. The LS 1/2w has the ability to adjust the brightness. Two antennas can cover all the surroundings within 360 degrees. You can also control the brightness of the LS 1/2w by a DMX console, which is under the standard DMX512 protocol. Light Storm: the best choice for your shooting.
Note: Does not include Battery
Tough and Professional Aero-Aluminum
Light Storm 1/2w use aero-aluminum to achieve the best balance performance of heat, density, strength, work-ability, etc. So the function parameters can get a perfect show Delicate design and elaborate production combine for robust but exquisite housing that can fulfill low forward heat of the fixture.
Unique SMD Lamp Beads
The performance of LED is one of important factors to consider LED lights. The Light Storm LS 1/2w is made of 264 SMD lamp beads which are using surface mount technology. Compared to DIP LED, SMD design makes the
light longer life, lower brightness decay, and wider light angle.
The Light Storm LS 1/2w is one-half size of the Light Storm LS 1. Only 22mm (0.072ft) thickness is so slim that can be used in a small environment like the wall corner, the car and some other small space. Compared with the traditional LED lights, such ultra-small size makes shooting more free, convenient and flexible.
From appearance to function, from material to craft,from small accessories to large complex production processes, the Light Storm 1/2w design reflects the combination of technology and humanity. The LS 1/2w undertakes more than 100 fabrication procedures such as extrusion, cutting, trim, sandblasting,
oxidation, laser engraving, etc.
The Lemo-Type Connector
The lemo-type connector is self-locking for a quick connection. Compared to conventional connectors, it can be operated quickly with one hand, making it more convenient and reliable.
The U-frame has two truss-mounting directions and can support full rotation of the lamp for easy lighting of different angles.
Selective Diffusing Paper
Aputure engineers tested 53 models of diffusing papers over more than 2000 hours to select the most suitable ones for our product. The diffusing paper has a smooth surface and is non-aging, acid-free and recyclable with low opacity so effective diffusion angles are covered far more than
the previous filter. The transmittance of the diffusing paper is about 85percent and a 180-degree effective diffusion angle.
Unique Light Control Separation Design
The Light Storm 1/2w’s unique light control separation design paves the way for the light back panel dissipation. With such a low center of gravity design, it greatly reduces the lantern supporting system burden. For now, operations will not be limited to the light panel and are focused on the controller box. In addition, replacing the battery becomes more flexible than before.
Dual Power Solutions
Two methods can be used to power the LS 1/2w. A SONY V export or Anton Bauer battery can be used for location shooting.
The adapter is for your indoor shooting. The brightness wheel on the controller box also can adjust the brightness. Two 90-degree antennas can cover all the surroundings within 360 degrees.
Using 2.4G FSK technologies, the Light Storm 1/2w can be adjusted in brightness wirelessly using a remote, even 100m away.