Sale! 3-axis-gimbal
3-axis-gimbal-canon-5d3-axis-gimbal-dslr3-axis-gimbal-nikon32bit-3-axis-gimbal32bit-3axis-dslr-gimbal32-bit-3-axis-controller-brushless-gimbal3axis-gimbal-32bit

3 Axis Gimbal 32-Bit + Joystick

$1,199.00 $769.00

Carbon Fiber 3 Axis Gimbal Supported cameras:
DSLR Camera Combination Max load 3 kg

  • Canon: 1Dc, 5D Mark III, Mark II, 7D, 60D, T2i
  • Nikon: Nikon D900, D800E, D700, D800, D3100, D3200, D3300, D5300, D610, D7100, D810, D90
  • Panasonic: GH4, Gh3
  • Sony: a7S, a7R, a7, a900, a5000, a6000, NEX-5T, NEX-6
SKU: QA257+QA206 Category: Tag:

Product Description

The New 32-Bit DSLR 3-Axis Gimbal is built from high-grade 3K Carbon Fiber tubes, and 2.0 Glassy Carbon Fiber for ultra light yet sturdy construction. It comes with CNC machined Aluminum Alloy brackets which are precisely engineered to integrate the 25mm carbon fiber frame giving you the strength you need. The DSLR Gimbal comes with 3 Brushless Motors (1 x BGM5208-180-12 hollow shaft motor, 2 x BGM5208-75 motors) to support DSLR camera combinations max loading 3 kg. It’s the perfect unit to start your custom DSLR gimbal build.

Model Number: QA257
Type: Carbon Fiber 3-Axis Gimbal Frame for DSLR’s
Size: 45cm (w) x 38cm (h) x 22cm (d)
Tube Size: 25mm
Materials: 3K Carbon Fiber & CNC Machined Aluminum Brackets

Motors: 3 x Silent Direct Drive Brushless Motors (included)

  • 1 x BGM5208-180-12 hollow shaft motor
  • 2 x BGM5208-75 motors

5208-75T x 2 Motor Specifications

  • Structure: 24N22P
  • Wire: 0.22mm
  • Turn: 75T
  • Motor Size: Φ63*24
  • Shaft: Hollow Shaft / Φ7.0 Out, Φ5.0 Inner
  • Ω Ri: 15.0 ohm
  • Tension: 0.7kg

5208 180T -12 Hollow Shaft Specifications with Slip Ring

  • Structure: 12N14P
  • Wire: 0.24mm
  • Turn: 180T
  • Motor Size: Φ63*24
  • Shaft: Hollow Shaft / Φ12.0
  • mΩ Ri: 17.2
  • Weight: 180g

Supported cameras:
DSLR Camera Combination Max load 3 kg

  • Canon: 1Dc, 5D Mark III, Mark II, 7D, 60D, T2i
  • Nikon: Nikon D900, D800E, D700, D800, D3100, D3200, D3300, D5300, D610, D7100, D810, D90
  • Panasonic: GH4, Gh3
  • Sony: a7S, a7R, a7, a900, a5000, a6000, NEX-5T, NEX-6

Weight of Gimbal: 3.9 lbs / 1.79 kg (with 3 x Brushless Motors)

BGC 3.0 32-bit 3-axis Brushless Gimbal Controller Specifications
Firmware V3.0

  • 32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
  • Allows camera control with the RC or analog joystick.
  • Use several switchable profiles for different modes of operation
  • Supports variety of RC protocols: PWM, Sum-PPM, spectrum and s-bus.
  • Battery voltage monitoring, compensating voltage drop in the PID-regulator.
  • Low battery alarm (output to 5V active buzzer).
  • Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
  • Can supply up to 1A current for external devices on the 5V power line.
  • Dedicated UART-socket to connect optional Bluetooth module
  • Reverse-polarity protection, overheat and over current protection
  • USB interface for the PC connection, to configure, control and upgrade firmware.
  • Graphical user interface to manage the settings. Windows / OS X / Linux versions.
  • Control through the Serial-protocol using dedicated API.
  • Improved attitude estimation algorithms
  • Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and  will make stable work in any frame position.
  • Size of the board: 50×50 mm
  • Distance between the mounting holes: 45 mm
  • Diameter of the mounting holes: 3 mm
  • Power supply voltage: 8–25 V (3s-5s LiPo) Not Included
  • Maximum motor current: 1,5 A
  • 5V output current to power external devices: up to 1 A

Joystick Specifications

Simple Rocker 0.9 is the extension board for Simple Rocker 1.2.
Output YAW through left-right control; Output camera signal through up-down control. (Applicable to camera focus and shutter trigger.)
When main board assembled with extension board, the output interface is on main board. PMW1 and PMW2 are both output same signal- camera signal. ROLL, PITCH, and YAW are controlled through serial ports.
Camera signal is usually turned off. Press the joystick on main board to activate output PWM, and release the joystick to turn it off.

http://www.basecamelectronics.com/simplebgc32bit/

Basic welding/ironing skills are required. For more information and trouble shooting, please refer to the AlexMos Simple BGC Project official website: http://www.simplebgc.com/eng/downloads/

Additional Information

Weight 2 kg